Used for securing floor carpets in place without the need for adhesives. This gives the benefit of easy removal should you wish to take the carpet out of your vehicle
Installation
| 1 |
Use a 6mm Drill bit. |
| 2 |
Drill floor. |
| 3 |
Place insert over the hole and using a hammer tap into hole. |
| 4 |
Lay carpet over the top, then taking the pin line up with insert and push through the carpet and into the insert. |
| 5 |
If you should struggle to get the pin through the carpet, using the hammer give it a gentle tap till it pierces the bottom of the carpet. |
